Lincoln INSTALLATION & OPERATING INSTRUCTIONS

INSTALLATION & OPERATING INSTRUCTIONS for IMPINGER® CONVEYOR OVENS MODEL SERIES 1000 – 1200 and 1400 TO BE SERVICED ONLY BY AUTHORIZED PERSONS 1000seriesops REV: 4/3/07 Part Number: 2810197 WARNING AND SAFETY INFORMATION IMPORTANT FOR YOUR SAFETY, DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS OR LIQUIDS IN THE VICINITY OT THIS OR ANY OTHER APPLIANCE. DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION. WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT. · Obtain from your local gas provider and post in a prominent location instructions to be followed in the event gas odors are detected. · It is required that the oven be placed under a ventilation hood to provide for adequate air supply and ventilation. · Minimum clearances must be maintained from all walls and combustible materials. See spacing instruction on Page 7. · Keep the oven free and clear of combustible material. · Adequate clearance for air openings to the combustion control chamber on both sides of the oven is required. · Do not obstruct the ventilation holes in the control panels, as these provide the combustion air for the burner and cooling air for the controls. · The oven is to be operated only on the type of gas and/or electricity as shown on the specification plate. · The power burner will not operate and gas will not flow through the burner without electrical power. · This manual should be retained for future reference. · The electrical wiring diagram is located under the control box covers. WARRANTY Lincoln Foodservice Products, LLC warrants to the original purchaser for use of each new ImpingerÒ Conveyor Oven as follows: any part which proves to be defective in materials or workmanship within the warranty period will, subject to the terms of this warranty, be repaired or replaced at Lincoln’s option. Repair or replacement is to be done by the assigned Lincoln Authorized Service Agency. Any claims under this warranty must be presented in writing to Lincoln through the assigned Authorized Service Agency promptly and within the warranty period. For ovens installed in the United States and Canada, defective parts of the original equipment are warranted for one year from the date of the “START-UP CHECKOUT” and the cost of repair or replacement labor shall be at the expense of Lincoln Foodservice Products, LLC for one year from the date of the “START-UP CHECKOUT. (START-UP CHECKOUT must occur within 24 months of manufacturing date for warranty to be in effect.)

The following items are not covered by warranty: Any item that is defective because of utility services (power surges, high and low voltage, high or low gas pressure or volume, or improper connections); conveyor belt; replacement fuses, bulbs, gaskets, and motor brushes; adjustments and calibrations for temperatures, speed and air flows.

Get The File | Download here | PDF Manual